Max6675 k Type Thermocouple Temperature Sensor Converter For Arduino Spi Interface Module Hw551
₨ 619.00
- MAX6675 module is a 12-bit resolution serial thermocouple analog-to-digital converter, internal integrated cold junction compensation circuit, linearity correction, and thermocouple break detection.
- Simple SPI serial port temperature value output, its temperature resolution capability is 0. 25 Degree, cold junction compensation range -20℃～ 85℃, wide operating voltage range DC3~5V.
- Combining the module and the IO port of the MCU via Dupont cables, the temperature value of the K-type thermocouple can be directly read using the SPI protocol.
- Module interface: GND VCC SCK CS SO; Set screw M6.
Description
- MAX6675 module is a 12-bit resolution serial thermocouple analog-to-digital converter, internal integrated cold junction compensation circuit, linearity correction, and thermocouple break detection.
- Simple SPI serial port temperature value output, its temperature resolution capability is 0. 25 Degree, cold junction compensation range -20℃～ 85℃, wide operating voltage range DC3~5V.
- Combining the module and the IO port of the MCU via Dupont cables, the temperature value of the K-type thermocouple can be directly read using the SPI protocol.
- Module interface: GND VCC SCK CS SO; Set screw M6.
Features:
- Simple SPI serial port temperature value output
- On-chip cold junction compensation
- High impedance differential input
- Thermocouple disconnection detection
- With a fixed mounting holes for easy fixed installation, set
- screw M6
- Working voltage range is 3.0~5.5V, operating current 50mA
- The operating temperature range of -20℃~ 85℃
- The temperature measurement accuracy: ± 1.5 °C
- Module Interface: GND VCC SCK CS SO
- Supply voltage: 3~5V DC
Package Include:
- 1 x MAX6675 Module
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
20cm Pin To Pin Jumper Wire Dupont Line 40 Pin Arduino Male To Male Jumper Wire
The 20cm Male-to-Male Jumper Wire Dupont Line (40-Pin) is perfect for Arduino, Raspberry Pi, breadboards, and PCB projects. These high-quality copper wires ensure secure and flexible connections without soldering.
Features:
✔ 40-Pin Ribbon Cable – Separates into individual wires
✔ Standard 2.54mm Pitch – Fits breadboards & PCBs
✔ Durable & Reusable – High-quality copper wire
✔ Color-Coded for Easy Use
Specifications:
🔹 Length: 20cm (8 inches)
🔹 Connector Type: Male-to-Male
🔹 Quantity: 40 wires (Multicolored)
📦 Package Includes: 1x 40-Pin Jumper Wire Set
🔧 Ideal for electronics prototyping, Arduino, and DIY projects!
30cm Pin To Hole Arduino Jumper Wire Dupont
30cm Male-to-Female Jumper Wire – 40-Pin Dupont Line
Perfect for Arduino, Raspberry Pi, breadboards, and PCBs, this 40-pin male-to-female jumper wire set ensures easy, flexible, and durable connections for your projects.
🔹 Length: 30cm
🔹 Standard 2.54mm pin spacing
🔹 Plug-and-play, no soldering required
🔹 Reusable & high-quality construction
Package Includes: 1 x 40-Pin Male-to-Female Jumper Wire (30cm)
Ideal for electronics, IoT, and prototyping!
Arduino 0.96 Inch OLED Display Module 128×64 I2C SSD 1306 LCD Screen
The 0.96-inch OLED display module features a 128x64 resolution and uses the SSD1306 controller, supporting I2C communication. It offers a crisp, self-illuminating display with low power consumption (0.08W at full brightness) and a wide viewing angle. Compatible with Arduino, Raspberry Pi, STM32, and more, it's ideal for displaying graphics, text, and bitmaps in embedded projects.
Features:
128x64 high-resolution OLED display
I2C interface, requiring only 2 IO pins
Wide viewing angle (>160°)
Low power consumption (0.08W)
Operating voltage: 3V-5V
Package Includes:
1 x 0.96-inch OLED Display Module (I2C, SSD1306)
Arduino 4 Channel Relay Module Board
This 4-channel relay module allows microcontrollers like Arduino, AVR, PIC, and Raspberry Pi to control high-power devices. It supports AC 250V 10A / DC 30V 10A loads and features LED indicators, screw terminals, and TTL-level control signals for easy integration.
Specifications:
✔ Voltage: 5V DC
✔ Max Load: 250V AC / 30V DC, 10A
✔ Control Signal: TTL
✔ Size: 76mm x 56mm x 17mm
Package Includes:
✅ 1 x 4-Channel 5V Relay Module
💡 Perfect for automation projects! Available across Pakistan
Arduino Nano V3 With nano cable In Pakistan
he Arduino Nano V3 is a compact, breadboard-friendly microcontroller based on the ATmega328. It offers the same functionality as the Arduino Duemilanove but in a smaller form factor. It operates at 5V, supports 14 digital I/O pins (6 PWM), 8 analog inputs, and runs at 16MHz. Powered via Mini-B USB, it is perfect for embedded projects.
Package Includes:
✅ 1x Arduino Nano V3
✅ 1x Mini-B USB Cable
Get the best price in Pakistan at As Tech and Threads!
Blue 1602 Lcd 16×2 Character Lcd Arduino Display For Arduino
The 1602 16x2 LCD is a white text on blue backlight display, ideal for Arduino projects. It supports 16 characters per line on 2 lines and works with the HD44780 controller, making it easy to interface with microcontrollers in 4-bit or 8-bit modes.
Features:
✅ 16x2 Character Display with blue backlight
✅ HD44780-compatible for easy interfacing
✅ Works with most microcontrollers
✅ Supports 4-bit and 8-bit parallel modes
Specifications:
✔ Power Supply: 5V
✔ Controller: SPLC780D1 / HD44780
✔ Operating Temp: -20°C to 70°C
📦 Package Includes: 1x 1602 16x2 Blue LCD Display
💡 Ideal for Arduino, DIY electronics, and display projects. Available across Pakistan!
Ft232rl 3.3v 5.5v Ftdi Usb To Ttl Serial Adapter Module For Arduino Mini Port
The FT232RL USB to TTL Adapter is a USB-to-serial converter designed for Arduino Mini and other TTL devices. It features auto-reset via DTR, selectable 3.3V/5V operation, and RX/TXD indicators for easy debugging. Ideal for programming and communication with microcontrollers.
Key Features:
✔ FT232RL Chipset
✔ Supports 3.3V & 5V (jumper selectable)
✔ Auto-reset function for Arduino
✔ USB-powered with overcurrent protection
Package Includes:
✅ 1x FT232RL USB to TTL Adapter
🚀 Order Now – Fast Delivery in Pakistan & UAE!
Ttp223 Touch Sensor Module Touch Sensor For Arduino And Raspberry Pi
TTP223 Capacitive Touch Sensor Module – Reliable & Sensitive
Enhance your projects with the TTP223 touch button module, offering accurate touch detection, low power consumption, and versatile output modes. Perfect for Arduino, IoT devices, home automation, and user interfaces. Customizable sensitivity for optimal performance.
🛒 Order Now – Available at the Best Price in Pakistan!
Fast delivery to Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Faisalabad, and all over Pakistan
Reviews
There are no reviews yet.