Max6675 k Type Thermocouple Temperature Sensor Converter For Arduino Spi Interface Module Hw551
₨ 619.00
- MAX6675 module is a 12-bit resolution serial thermocouple analog-to-digital converter, internal integrated cold junction compensation circuit, linearity correction, and thermocouple break detection.
- Simple SPI serial port temperature value output, its temperature resolution capability is 0. 25 Degree, cold junction compensation range -20℃～ 85℃, wide operating voltage range DC3~5V.
- Combining the module and the IO port of the MCU via Dupont cables, the temperature value of the K-type thermocouple can be directly read using the SPI protocol.
- Module interface: GND VCC SCK CS SO; Set screw M6.
Description
- MAX6675 module is a 12-bit resolution serial thermocouple analog-to-digital converter, internal integrated cold junction compensation circuit, linearity correction, and thermocouple break detection.
- Simple SPI serial port temperature value output, its temperature resolution capability is 0. 25 Degree, cold junction compensation range -20℃～ 85℃, wide operating voltage range DC3~5V.
- Combining the module and the IO port of the MCU via Dupont cables, the temperature value of the K-type thermocouple can be directly read using the SPI protocol.
- Module interface: GND VCC SCK CS SO; Set screw M6.
Features:
- Simple SPI serial port temperature value output
- On-chip cold junction compensation
- High impedance differential input
- Thermocouple disconnection detection
- With a fixed mounting holes for easy fixed installation, set
- screw M6
- Working voltage range is 3.0~5.5V, operating current 50mA
- The operating temperature range of -20℃~ 85℃
- The temperature measurement accuracy: ± 1.5 °C
- Module Interface: GND VCC SCK CS SO
- Supply voltage: 3~5V DC
Package Include:
- 1 x MAX6675 Module
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
10cm Pin To Hole Jumper Wire Dupont Line 40 Pin Male To Female Arduino Jumper Wires
A high-quality 40-pin male-to-female jumper wire set, perfect for prototyping with Arduino, Raspberry Pi, and PCBs. These 10cm flexible, multicolored wires ensure easy, solder-free connections with 2.54mm standard headers.
Specifications:
✔ Material: High-grade copper wire
✔ Length: 10cm
✔ Connector Type: Male to Female
✔ Quantity: 40 wires in a ribbon
📦 Package Includes:
1 x 10cm 40-Pin Male to Female Dupont Jumper Wire
🛒 Order now – Best price in Pakistan!
20cm Male to Female Jumper Wires – 40 Pin Dupont Cable for Arduino & Electronics Prototyping
Perfect for Arduino, Raspberry Pi, and circuit prototyping! These 20cm (8-inch) male-to-female jumper wires ensure quick, solder-free connections. Comes in a 40-pin ribbon cable, easily separable for individual use.
🔹 High-quality copper wire for strong conductivity
🔹 2.54mm (0.1") standard pin spacing
🔹 Flexible, reusable & color-coded for easy identification
📦 Package Includes: 1 x 40-Pin Jumper Wire Ribbon Cable
Ideal for DIY electronics & prototyping. Order now!
Arduino 0.96 Inch OLED Display Module 128×64 I2C SSD 1306 LCD Screen
The 0.96-inch OLED display module features a 128x64 resolution and uses the SSD1306 controller, supporting I2C communication. It offers a crisp, self-illuminating display with low power consumption (0.08W at full brightness) and a wide viewing angle. Compatible with Arduino, Raspberry Pi, STM32, and more, it's ideal for displaying graphics, text, and bitmaps in embedded projects.
Features:
128x64 high-resolution OLED display
I2C interface, requiring only 2 IO pins
Wide viewing angle (>160°)
Low power consumption (0.08W)
Operating voltage: 3V-5V
Package Includes:
1 x 0.96-inch OLED Display Module (I2C, SSD1306)
Arduino 5v Water Pump Submersible Pump
Submersible Arduino Pump Motor – Efficient & Compact
This low-cost, small-sized submersible pump operates from 2.5V to 6V and delivers up to 120 liters per hour with low current consumption (130-220mA). Ideal for Arduino projects, it’s perfect for small water pumps in aquariums, fountains, or hydroponic systems. Built with durable engineering plastic for long-lasting use.
Key Specs:
Flow Rate: 80-120 L/H
Max Lift: 40-110mm
Continuous Life: 500 hours
Operating Voltage: 2.5V - 6V
Package Includes: 1x Submersible Pump Motor
Esp32-cam Wifi + Bluetooth Camera Module Development Board Esp32 With Camera Module Ov2640 For Arduino
ESP32-CAM Wi-Fi + Bluetooth Dual-Mode Development Board
The ESP32-CAM is a compact and powerful development board with Wi-Fi and Bluetooth capabilities. Featuring a dual-core processor, it supports both OV2640 and OV7670 cameras, and offers a variety of interfaces (UART, SPI, I2C) for easy integration. Ideal for IoT applications, it supports image uploads, TF cards, and low-power operation modes.
Key Specs:
Dual-Core CPU: Up to 240 MHz
Camera Support: OV2640, OV7670
Wi-Fi/Bluetooth: 802.11 b/g/n, Bluetooth 4.2
Power Supply: 5V
Interfaces: UART, SPI, I2C, PWM
Package Includes: 1x ESP32-CAM Module
L293 L293d Motor Driver Module Arduino Motor Driver Shield In Pakistan
L293D Motor Driver Shield for Arduino – Control DC & Stepper Motors
The L293D Motor Driver Shield for Arduino allows you to control up to 4 DC motors or 2 stepper motors simultaneously. With precise speed and direction control, it’s perfect for robotics, automation, and IoT projects. It supports a wide voltage range (4.5V to 25V) and includes powerful features like thermal shutdown protection, easy connections for servo motors, and external power support.
Key Features:
Controls up to 4 DC motors or 2 stepper motors
Supports 5V servos
Wide voltage range: 4.5V to 25V
0.6A per bridge (1.2A peak) current handling
Compatible with Arduino Mega, UNO, and more
Package Includes: 1x L293D Motor Driver Shield
Ttp223 Touch Sensor Module Touch Sensor For Arduino And Raspberry Pi
TTP223 Capacitive Touch Sensor Module – Reliable & Sensitive
Enhance your projects with the TTP223 touch button module, offering accurate touch detection, low power consumption, and versatile output modes. Perfect for Arduino, IoT devices, home automation, and user interfaces. Customizable sensitivity for optimal performance.
🛒 Order Now – Available at the Best Price in Pakistan!
Fast delivery to Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Faisalabad, and all over Pakistan
Reviews
There are no reviews yet.